EagleTree Vector GPS/Magnetometer v2

CHF 59.00

Verfügbar bei Nachbestellung

Beschreibung

The GPS/Magnetometer V2 (for Vector and MicroVector) simultaneously receives and monitors both GPS and GLONASS satellites, which can provide the following benefits over GPS-only receivers:

  • Improved position accuracy for more precise hovering and tracking
  • Faster fix time
  • Up to 24 satellites in view

 

What’s Included

  • GPS/Mag V2 Sensor
  • Cable (approx 16″/40 cm)

Identification

The GPS/Mag V2 is identified by a label (shown below) on the BOTTOM of the GPS module.

 

Compatibility

The GPS/Mag V2 is compatible with all Vector and MicroVector systems, after firmware update.   Vector software version 11.78 or higher is required for correct GPS V2 operation.

Dimensions (L x W x H, approximate):
  • GPS/Mag: 35mm x 24mm x 15mm

Mass (approximate):

  • GPS/Mag: 13g

Cable: apx 16 inches/40 cm

Das könnte dir auch gefallen …

Menü